Aluminum Half Sphere

500MM(20inch) Aluminum Half Sphere.
A6061 aluminum alloy water pressured
Ample wall thickness for welding and tapping Metric and Unified thread.
MOQ: 1pcs
Delivery Time: 7 days for Scheduled production.

Send Inquiry

More Information

More Information

Description

Aluminum Half Sphere Production Method

Water Pressured

The aluminum half sphere is made from A6061 aluminum sheet by water pressure. we’ll cut them to half when forming aluminum sphere. then trimming cut edge. Mill polish or raw finish available.It has good mechanical properties, exhibits good weld ability, and is very commonly extruded.It is one of the most common alloys of aluminum for general-purpose use.

Attributes:

CHEMICAL COMPOSITION
Alloy Si Fe Cu Mn Mg Cr Zn Ti OTHERS
EACH
OTHERS
TOTAL
Al
Min
A6061 0.40-0.8 0.7 0.15-0.40 0.15 0.8-1.2 0.04-0.35 0.25 0.15 0.05 0.15 Remainder
  • Size Range:∅6mm to ∅3500MM(∅ .236inch to ∅11½ft)
  • Thickness:1mm to 6MM(20GA to 3GA)
  • Ample wall thickness for welding and tapping Metric and Unified thread.
Product Data

Product Data

Additional information

DIAMETER (MM) 1000mm, 102mm, 10mm, 1100mm, 114mm, 1200mm, 120mm, 127mm, 1300mm, 133mm, 138mm, 1400mm, 1500mm, 150mm, 159mm, 15mm, 1600mm, 1700mm, 1800mm, 180mm, 1900mm, 19mm, 2000mm, 200mm, 2100mm, 219mm, 2200mm, 2400mm, 2500mm, 250mm, 25mm, 2600mm, 2700mm, 2750mm, 2800mm, 3000, 3000mm, 300mm, 30mm, 32mm, 3500mm, 350mm, 38mm, 400mm, 42mm, 450mm, 480mm, 500mm, 510mm, 51mm, 550mm, 55mm, 600mm, 60mm, 63mm, 650mm, 66mm, 6mm, 700mm, 750mm, 76mm, 800mm, 80mm, 850mm, 89mm, 8mm, 900mm, 90mm, 950mm, 95mm
MATERIAL A6061 Aluminum Alloy
FINISH Mill Finished, Raw Finished
THICKNESS 1.5mm, 2.5mm, 2mm, 3mm, 4mm, 5mm, 6mm